Your local electrician in Battle Ground and Southwest Washington.

Colt from Tane Electric troubleshooting a residential circuit in an outdoor electrical panel in the Battle Ground area.

Electrical work, done right and explained clearly by someone who cares.

Tane Electric is a family-owned electrical business led by Colt Whitehead, serving homes and businesses in Battle Ground and across Southwest Washington. From electrical repairs and panel upgrades to whole-home rewiring and EV charger installation, you get straight answers and personal service.

⌾ Licensed, Bonded & Insured
◌ Two-Year Warranty
▦ Residential + Commercial
Colt from Tane Electric inspecting a residential electrical panel for a possible upgrade, EV charger, and additional circuits.

Owner-led. Community rooted.

A local electrician,
not a call center

When you call Tane Electric, you’re talking to Colt (pictured here). You’ll get quick responses, clear pricing, and work that’s done safely and built to last.

We show up when we say we will, treat your home or business with respect, and clean up when the job is done.

Good work. Fair price. Local pride.

Google Reviews

Recommended by the people who call us.

5.0 from 33 Google reviews. Thoughtful service, fair pricing and clear explanations come up again and again.

Read all 33 Google reviews

Frequently asked questions

Answers before the work begins.

Do you offer free estimates?

Yes. Reach out with the work you have in mind, and Tane Electric can discuss your project and provide an estimate.

Do you work on older homes?

Yes. Updating existing electrical systems in newer and older homes and offices is one of Tane Electric’s specialties.

Do I need an electrical permit?

Permit requirements depend on the electrical work and your property’s location. Talk directly to Colt about your project, and see our guide for local permitting authorities and inspection information. View Permits & Inspections →

What should I do if a breaker keeps tripping?

Repeated trips are a warning sign that needs an electrician’s attention. An overloaded circuit is one possible cause, but an inspection is needed to identify the problem. Contact Colt to arrange electrical troubleshooting before treating it as a routine reset.

How do I know if I need a panel upgrade?

A panel upgrade may be worth considering when you’re adding an EV charger, major appliances, or other electrical loads. Colt can assess your existing panel, available capacity, and project needs to determine whether an upgrade or another solution is appropriate. A tripping breaker alone does not establish that you need a new panel.

How can I prepare for an electrical estimate?

Have your property address, a short description of the work, and your preferred timing ready. Note which rooms or devices are affected and any changes you’re planning, such as an EV charger or new appliances. If you already have equipment specifications or photos, keep them handy. You do not need to remove panel covers or touch wiring to prepare.

What areas do you serve?

Tane Electric serves Battle Ground, Camas, Kalama, La Center, Ridgefield, Vancouver, Washougal, Woodland, and Yacolt.

Is the work covered by a warranty?

Tane Electric offers a two-year warranty on parts and labor from the date of installation.

Ready when you are

Let’s get your electrical project moving.

⌁ Explore Our Southwest Washington Service Areas
AmboyArielBakerBarbertonBattle GroundBrush PrairieCamasCharter OakCougarDoleDuluthFargher LakeFelidaFern PrairieFive CornersHazel DellHeissonHockinsonKalamaLa CenterLake ShoreLambertLewisvilleLivingstonMeadow GladeMill PlainMinnehahaMount VistaOrchardsPine GroveRidgefieldSaraVancouverVenersborgWalnut GroveWashougalWoodlandYacolt

Daily Electrical Updates

Daily Electrical Safety & Facts

Verified insights and safety tips compiled from trusted industry authorities like the NEC, UL, and Mike Holt.

Electrical Safety Tip

Call 811 before digging in Clark County

Three Short Facts
  1. Underground electrical lines can be present where you plan to trench or excavate.
  2. A free utility locate request notifies affected utilities so their underground lines can be marked.
  3. Clark Public Utilities marks the underground electric distribution and service lines it owns and maintains.
View All Electrical Facts
Three Quick Safety Tips
  1. Call 811 at least two full business days before digging. Allow the required time and confirm the affected utilities have responded before starting.
  2. Keep utility markings visible and use hand tools for digging within 24 inches of the marks, following Clark Public Utilities guidance.
  3. Check whether privately owned lines also cross your project area. Do not assume a public utility locate identifies every buried cable on your property.
View All Safety Tips

Electrical Safety Tip

Microwave door and appliance safety

Three Short Facts
  1. A microwave heats food using non-ionizing electromagnetic energy.
  2. A microwave in good condition is designed to contain that energy during normal operation.
  3. Damaged hinges, latches, or door seals can compromise the appliance’s protective enclosure.
View All Electrical Facts
Three Quick Safety Tips
  1. Check that the door closes correctly and that its hinges, latches, and seals are intact.
  2. If the door is damaged or does not close properly, stop using the microwave and contact its manufacturer for assistance.
  3. Stop using a microwave that appears to keep operating with its door open. Contact the manufacturer rather than attempting to defeat or repair its safety mechanisms yourself.
View All Safety Tips

Electrical Safety Tip

Corded power tool safety

Three Short Facts
  1. A plugged-in tool can start accidentally if its switch is pressed while it is being carried.
  2. Heat, oil, sharp edges, and cutting surfaces can damage a power tool’s cord.
  3. An electric tool is not automatically suitable for damp or wet conditions; it must be approved for that use.
View All Electrical Facts
Three Quick Safety Tips
  1. Disconnect a tool before changing bits or blades, servicing it, or putting it away.
  2. Carry the tool by its handle and disconnect it by the plug. Never lift it by the cord or yank the cord from an outlet.
  3. Keep fingers away from the switch when carrying a connected tool. Work in good light and store tools somewhere dry.
View All Safety Tips